Modify Selection
- Hazard prevention and control:
- Ventilation
- or
- Dilution ventilation
- or
- Push pull ventilation
- or
- Fan ventilation
- or
- Blowing ventilation
- or
- Ventilation control
- or
- Diffusion
- or
- Auxiliary ventilation
- or
- Exhaust ventilation
- or
- Recirculating ventilation
- or
- Scrubber induced airflow
Home Links
Results 71 - 80 of 130
-
2/1/2008 - Conference papersThis paper describes NIOSH research demonstrating that the ventilation of large-opening mines improves significantly by including ventilation requirements in the mine planning process and implementing some practical techniques during mining.
-
1/1/2008 - Reports of InvestigationsThis report discusses the testing and full-scale evaluations of a recently developed carbon fiber-reinforced polymer (CFRP) reinforcement technique for upgrading existing mine ventilation seals to withstand an explosion pressure of 50 psi or greater whi...
-
10/1/2007 - Peer reviewed journal articlesTo transfer CFD expertise to analyze and design a face-ventilation system, a comprehensive validation study of current CFD tools against mining-related benchmark experiments is required. This study was dedicated to the methane behavior in an empty (cont...
-
8/1/2007 - Peer reviewed journal articlesThis article focuses on U.S. Bureau of Mines (USBM) and NIOSH research to examine factors that had a significant influence on mine face ventilation design during the past century.
-
2/1/2007 - Conference papersThe fact that methane ignitions continue to occur at the mining face indicates that monitoring with machine-mounted methanometers does not always indicate the presence of high methane concentrations. Methane concentrations at the face change quickly du...
-
2/1/2007 - Conference papersDuring the 20th century, the increased emphasis on worker health and safety and the advent of new mining equipment and methods led to many changes in mine face ventilation practices.
-
6/1/2006 - Conference papersA cooperative research effort was established to lower respirable dust levels in an iron ore grinding and concentrator plant. The most significant improvement was realized by changing the ventilation profile throughout the entire facility. Another succe...
-
6/1/2006 - Conference papersThe Super Stopping is designed as a long-term permanent stopping for use in the main entries of the mine, while the EZ-Up Curtain Stopping, although very durable, is designed more for portability and ease of installation. This paper describes the design...
-
6/1/2006 - Conference papersA new protocol based on rigid arch loading of the structure is proposed to determine the true transverse load capacity of block stoppings. Tests show that load capability depends on the block's physical properties and the wall's geometric properties.
-
6/1/2006 - Book chapters, Information CircularsThis chapter gives guidelines for preventing methane gas explosions at continuous miner sections in coal mines, both at continuous miners and at roof bolters. The need to control peak methane emissions is particularly stressed. Emphasis is also placed...
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program